
Plastic syringe
How to use: Open the PDMS package, remove the luer lock seal cap and install the infusion line tightly. Connect the tube, making sure that it is not bottlenecked, to the pneumatic connector on the dispensing machine and deliver at pressures not exceeding 60 PSI. Due to the high viscosity of the liquid, it is not recommended to inject it by hand. We recommend the use of special cannulas, specially designed for infusion of viscous fluids.
PDMS 1000 – Plastic syringe 10 cc with dispenser | MMD-655 |
PDMS 1000 – Plastic syringe 15 cc with dispenser | MMD-658 |
PDMS 1300 – Plastic syringe 10 cc with dispenser | MMD-683 |
PDMS 2000 – Plastic syringe 10 cc with dispenser | MMD-693 |
PDMS 5000 – Plastic syringe 10 cc with dispenser | MMD-671 |
PDMS 5000 – Plastic syringe 15 cc with dispenser | MMD-672 |

Glass syringe
How to use: Open the PDMS package and take out the components of the kit, the syringe is equipped with Luer conical connection, the fixing system (Lock) is supplied separately and, after removing the seal cap, must be inserted into the conical connection of the syringe pushing it until it clicks. Now you can mount the infusion line tightly tightened or an infusion cannula. We recommend the use of special cannulas, specially designed for infusion of viscous fluids.
PDMS 1000 – Glass syringe 10 cc | MMD-665 |
PDMS 1300 – Glass syringe 10 cc | MMD-686 |
PDMS 2000 – Glass syringe 10 cc | MMD-696 |
PDMS 5000 – Glass syringe 10 cc | MMD-675 |